|
|
Basket Strainers |
Efficient & Dependable for:
Removing debris and dirt from the process liquids.
Features »
- Heavy Duty, sturdy, made from moulded PP, universally accepted chemical resistant thermo Plastic
- Minimum pressure drops with maximum dirt and solid particals holding capacity
- Can be easily cleaned just by removing the top cover. No tools required
|
|
|
|
|
Priming Chambers |
Efficient & Dependable for:
Priming PP Centrifugal Pumps
Features »
- Used in horizontal centrifugal pumps when liquid is below the pump center line (negative suction)
- Most suitable for negative suction upto 3mtrs without foot Valve
|
|
|
|
|
G. F. P. P. Plates Filteration Systems |
In Electroplating, certain corrosive chemicals in the electroplating bath are required to be continuously agitated or operated at high current densities. In such cases, solid particles remain suspended rather than settle at the bottom. These suspended particles cause roughness in plating. In order to remove these suspended particles, continuous filtration of the bath is necessary which is done by DiaFlow Filtration Systems.
DiaFlow offers a range of Plate & Cartridge Filtration Systems engineered to provide absolute and economical removal of suspended solid or organic impurities from corrosive chemicals. DiaFlow Filter Systems are provided with reusable PP Filter Cloth along with Filter Paper. Filter Units are also available with PP Filter Cartridges. |
|
|
|
|
Flexible Impeller Pumps |
Flexible Impeller Self Priming Pumps in SS 316 & Phenilic Resin
Efficient & Dependable for:
- Plating Solution
- Detergent and Soap Solution
- Acids / Alkalies
- Oils
- Chemical effluent
- Inks, dyes and Paint
- Latex
- Adhesives
Features:
- Self Priming upto 3.5 mtrs
- Impeller and Seal Opetions
- Handles Viscous Liquid
- Handles soft/ hard Solids without Damage or Clogging
- Allows flow to be regulated by varying pump speed
Impeller Options:
- Neoprene
- Nitrile
- EPDM
- Viton
Seal Options:
- Carbon v/s Ceramic
- Carbon v/s Silicon
- Carbide Silicon Carbide v/s Silicon Carbide
|
|
|
|
|
Vertical Pump |
Description / Specification of Vertical Pump
We are involved in offering a wide range of Vertical Pump to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Vertical Pump. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Butterfly Valves |
Efficient & Dependable for:
- Corrosive liquids, slurry and water
Features:
- Pressure rating: 7.5 kg/cm2
- Flanges: As per ASA - 150
- Body & Disc: Solid injection moulded polypropylene
- Low pressure drop due to wafer type disc
- V notch retention designed liner provides positive sealing of liner to the body
- Symmetrical design - suitable for use in both directions
- Elastomers liners available in Neoprene, Hypalon and EPDM
|
|
|
|
|
Damper Valves |
Efficient & Dependable for:
- Volume control for air, gas and corrosive fumes ventilation system
- Excellent for ON/OFF Service
- For Volume Control Balancing
- For controlling gas & fumes from fume cupboards in chemical laboratories
- For gas scrubbers and pollution equipment
Features:
- Single Flap
- Minimum leakage utility round flap
|
|
|
|
|
Flo Ductors |
A FLO-DUCTOR system provides solution agitation with a centrifugal pump by drawing liquid from a tank and returning it to the tank through a sparger system, similar to that used for air agitation, with eductors strategically placed along the sparger pipe. The agitation delivers 5 times the pump output at each nozzle effectively distributing agitation to critical areas in your process tank. The system is driven by your choice of vertical, magnetic drive, self-priming or mechanical seal pump.
Efficient & Dependable for:
Features:
- Reduces airborne fume emissions by 90%
- Saves heating costs up to 25%
- Reduces brightener consumption 20%
- Saves metal as a result of more uniform brightness and thickness distribution
- Improves throw and deposit thickness in blind and through holes and recesses
- Permits increased current density, especially compared to air or cathode rod agitation, for faster plating rate
- Reduces carbonates in alkaline processes
- Reduces or eliminates gas-pitting
- Provides constant agitation because Flo-Ductor systems don’t clog
|
|
|
|
|
Guage Savers |
Efficient & Dependable for:
- For measuring corrosive fluid line pressure with accurate readings from 0 to 10 kg/cm2
Features:
- All Plastic Gauge Saver consists of a moulded cylinder incorporating a top and bottom chamber
- It is an effective means of eliminating the necessity for a costly high alloy gauge in the measuring of line pressure in pipes carrying corrosive chemicals
|
|
|
|
|
|
|
|
|